Nonlinear LBO Crystal

Superior infrared material sapphire crystal

Sapphire is a superior optical material possesses excellent optical, chemical and physical properties.

Inquiry now
products Details

The hardest of the oxide crystals, sapphire retains its high strength at high temperatures, has good thermal properties and excellent transparency. It has high transmittance from 1.5 μm to 6.0 μm in the middle infrared. The other hand, it is chemically resistant to common acids and alkali at temperatures up to 1000 °C as well as to HF below 300 °C. These properties encourage its wide use in hostile environments where optical transmission in the range from the vacuum ultraviolet to the near infrared is required.


Physical and Optical Properties:

Crystal Type

Hexagonal

Lattice Parameter

a=4.75Å, c=12.97Å

Transmission Band

0.15-6 μm

Melting Point

2040 ℃

Thermal Conductivity

4W/cm/℃

Refractive Index

1.623 at 5μm

Specific Heat

0.18cal/g/℃

Thermal Expansion

7.7x10-6/℃

Mohs Hardness

9

Density

3.98g/cm3

Specifications:

Material

Sapphire

Dimension Tolerance

+0.0, -0.1mm

Thickness Tolerance

±0.1mm

Surface Quality

40/20

Clear Aperture

>90%

Flatness

λ/4@632.8nm

Parallelism

3'

Bevel

<0.25mm×45°

Coating

According to Customer Request




related Applications
FZ growth Silicon mirrors Infrared reflectors and windows' material Silicon (Si)
Infrared reflectors and windows' material Silicon (Si)
Silicon (Si) is grown by Czochralski pulling techniques (CZ) and contains some oxygen that causes an absorption band at 9 microns. To avoid this, material can be prepared by a Float-Zone (FZ) process.
Read More
IR material Ge Window For high performance infrared imaging systems Germanium(Ge)
For high performance infrared imaging systems Germanium(Ge)
Germanium (Ge) is the preferred lens and window material for high performance infrared imaging systems in the 8–12 μm wavelength bands.
Read More
Optical ZnS Windows Infrared optics CVD ZnS windows for full band of 0.4-12μm
Infrared optics CVD ZnS windows for full band of 0.4-12μm
ZnS is grown by chemical vapor deposition (CVD) method, for windows,domes and lenses for thermal-imaging system.
Read More
Zinc Selenide Windows Infrared applications ZnSe for IR lasers
Infrared applications ZnSe for IR lasers
ZnSe (Zinc Selenide) is the most popular material for infrared applications. It can transmit from 0.6 μm to 20 μm.
Read More
HGTR-KTP crystal HGTR-KTP crystal
HGTR-KTP crystal
Nonlinear KTP crystal named Potassium Titanyl Phosphate (KTiOPO4 or KTP) is widely used in both commercial and military lasers including laboratory and medical systems, range-finders, lidar, optical communication and industrial systems.
Read More
High reflection Mirror High Reflection Mirror for scientific apparatus
High Reflection Mirror for scientific apparatus
High reflection mirror is an object with a surface that has high reflection. It is smooth enough to form an image.
Read More
Nd:YAG crystals Nd:YAG crystal
Nd:YAG crystal
Nd:YAG (neodymium-doped yttrium aluminium garnet; Nd:Y3Al5O12) is a crystal that is used as a lasing medium for solid-state lasers. The dopant, triply ionized neodymium, typically replaces yttrium in the crystal structure of the yttrium aluminium garnet (YAG), since they are of similar size. Generally the crystalline host is doped with around 1% neodymium by atomic percent. Applications: Nd:YAG absorbs mostly in the bands between 730–760 nm and 790–820 nm.At low current densities krypton flashlamps have higher output in those bands than do the more common xenon lamps, which produce more light at around 900 nm. The former are therefore more efficient for pumping Nd:YAG lasers.
Read More
SF10 Cylindrical Lenses Plano-convex Cylindrical Lenses
Plano-convex Cylindrical Lenses
Cylindrical lenses are mainly used to change the size of imaging per design requirements. Plano convex cylindrical lenses are used to focus light to a thin line in the applications like laser scanners, spectroscopy, dye lasers, acousto-optics, optical processors and etc.
Read More
Frequency doubling LiNbO3 crystal Optical nonlinear frequency doubling LiNbO3 crystal
Optical nonlinear frequency doubling LiNbO3 crystal
LiNbO3 crystals are the most commonly used material for pockel cells, Q-switches and phase modulators, waveguide substrates, surface acoustic wave (SAW) wafers, etc.
Read More
IR material Ge Window For high performance infrared imaging systems Germanium(Ge)
For high performance infrared imaging systems Germanium(Ge)
Germanium (Ge) is the preferred lens and window material for high performance infrared imaging systems in the 8–12 μm wavelength bands.
Read More
Zinc Selenide Windows Infrared applications ZnSe for IR lasers
Infrared applications ZnSe for IR lasers
ZnSe (Zinc Selenide) is the most popular material for infrared applications. It can transmit from 0.6 μm to 20 μm.
Read More
Cr4:YAG Crystal For passively Q-switching diode pumped Cr4:YAG Crystal
For passively Q-switching diode pumped Cr4:YAG Crystal
Passive Q-switching is preferred for simplicity of manufacture and operation, low cost and reduced system size and weight. Cr4+:YAG is an excellent crystal for passively Q-switching diode pumped or lamp-pumped Nd:YAG, Nd:YLF, Yb:YAG or other Nd and Yb doped lasers at wavelength from 1.0 to 1.2um.
Read More
Send a Message
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!
Get In Touch
Leave Message welcome to Hundreds Optics
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

Home

Products

News

contact